PP Igo IV Solution Production Line
PP Igo IV Solution Production Line
Preform / Hanger Abẹrẹ ẹrọ
+ Ẹrọ fifun igo
+ Fifọ-Filling-Sealing ẹrọ
Ọrọ Iṣaaju
Laifọwọyi PP igo IV ojutu iṣelọpọ laini pẹlu awọn ohun elo 3 ṣeto, Preform / Hanger Injection Machine, Igo fifun ẹrọ, Fifọ-Filling-Sealing machine.Laini iṣelọpọ ni ẹya ti aifọwọyi, ti eniyan ati oye pẹlu iṣẹ iduroṣinṣin ati itọju iyara ati irọrun.Ṣiṣe iṣelọpọ giga ati iye owo iṣelọpọ kekere, pẹlu ọja didara ti o jẹ aṣayan ti o dara julọ fun igo ṣiṣu ojutu IV.
Fidio ọja
PP igo fifun ẹrọ
Igbesẹ 1
Ibudo ikojọpọ Preform:
Opolopo preforms ti wa ni fi sinu hopper, ki o si awọn Rotari preforms ono eto fihan preforms nipasẹ hoisting conveyor.Independent petele yapa preform dari aarin dabaru preform ikojọpọ.
Igbesẹ 2
Eto lọtọ, yiyi, siseto eto skru equidistance fun preform:
Awọn apẹrẹ ti pin pẹlu ijinna dogba ati gbigbe si disiki iyipo inaro, lẹhinna yiyi nipasẹ iwọn 180 ati gbe lọ si awọn apẹrẹ petele miiran ti n ṣeto disk.Ko si idena preform ko si si iyapa pẹlu ipo deede.
Igbesẹ 3
Alapapo Preform:
Apẹrẹ apoti ina alapapo ila meji, itusilẹ ooru to dara, rirọpo rọrun ati itọju.
Igbesẹ 4
Preform mu, preform ati ẹrọ gbigbe igo:
Servo ìmọ iru servo gbigbe gbigbe, awọn ika ọwọ clamping kamẹra laisi alokuirin ṣiṣu ati lulú lati rii daju didara ọja.
Igbesẹ 5
Idaduro olominira ati siseto nina:
O gba apẹrẹ ẹyọ titọ lọtọ, eyiti ko dabaru pẹlu ara wọn.Lilẹ ti o dara lati fẹ igo, ko si jijo.Na ọpá ti wa ni ìṣó nipasẹ ọkan servo eto.
Igbesẹ 6
Ṣiṣii mimu ati siseto pipade:
Nigbati a ba gbe awọn preforms lọ si ibudo fifun igo, eto servo wakọ apa golifu lati Titari mitari fun ṣiṣi ati gbigbe gbigbe lati ṣaṣeyọri iṣẹ-ṣiṣe ipinsimeji.
Igbesẹ 7
Ilana sisopọ:
Awọn igo ti o pari ni a mu jade lati ibudo fifun igo.Awọn ifọwọyi ti ẹrọ sisopọ gbe wọn soke ati gbejade si ẹrọ ifọwọyi ẹrọ fifọ-fill-seal lati mọ iṣelọpọ asopọ adaṣe.
Awọn anfani:
1.Servo wakọ ati iduroṣinṣin lakoko gbigbe iyara to gaju, ipo naa jẹ deede, ti o tọ, ati iye owo itọju jẹ kekere.
2.The cam clamping ika lai ṣiṣu alokuirin ati lulú lati rii daju ọja didara.
3.High gbóògì agbara: ibiti o lati 4000-15000bottles fun wakati kan.
4.Closed integral pq structure, kongẹ aarin ijinna, oruka ati awọn miiran ajeji ohun ko le tẹ awọn pq, rorun itọju.
5.The lilẹ ko ni air jo, mu awọn fifun ṣiṣe, kuru igo lara akoko.
Awọn pato Imọ-ẹrọ:
| Item | Awoṣe ẹrọ | |||||
| CPS4 | CPS6 | CPS8 | CPS10 | CPS12 | ||
| Agbara iṣelọpọ | 500ml | 4000BPH | 6000BPH | 8000BPH | 10000BPH | 12000BPH |
| Max igo iga | mm | 240 | 230 | |||
| Giga preform ti o pọju (pẹlu ọrun) | mm | 120 | 95 | |||
| Afẹfẹ fisinu (m³/min) | 8-10bar | 3 | 3 | 4.2 | 4.2 | 4.5 |
| 20bar | 2.5 | 2.5 | 4.5 | 6.0 | 10-12 | |
| Omi Dimi (m³/wakati) | 10 ° C (titẹ: 3.5-4bar) 8HP | 4 | 4 | 7.87 | 7.87 | 8-10 |
| Omi Itutu | 25°C(titẹ: 2.5-3bar) | 6 | 10 | 8 | 8 | 8-10 |
| Iwọn | T | 7.5 | 11 | 13.5 | 14 | 15 |
| Iwọn ẹrọ (pẹlu ikojọpọ Preform) | (L×W×H)(MM) | 6500*4300*3500 | 8892*4800*3400 | 9450*4337*3400 | 10730x4337x3400 | 12960×5477×3715 |
PP Bottle Fifọ-filling-lilẹ Machine
Igbesẹ 1
Ibudo ifunni igo
O gba ọna asopọ taara laarin orin gbigbe ati kẹkẹ titẹ ifunni igo, di ọrùn igo lati gbejade, pẹlu afẹfẹ fisinuirindigbindigbin lati mu yara jiṣẹ, ko si fifa.
Igbesẹ 2
Igo ionic air fifọ ibudo
Ilana mimọ ati ilana jẹ: yi igo naa pada;paipu afamora ga soke kamẹra lati bo ẹnu igo;paipu afẹfẹ ionic tun dide si igo pẹlu kamera;Afẹfẹ fisinuirindigbindigbin ti wa ni fifun sinu paipu fifun lati sọ igo naa di mimọ;
Ati nigbakanna muyan awọn patikulu entrained ni airflow jade ti igo.
Igbesẹ 3
Ibudo kikun
Awọn igo ṣiṣu ti a fọ ni a gbe lọ si ibudo kikun nipasẹ afọwọyi, kikun nozzle ti o wa kakiri awọn igo ṣiṣu fun kikun.Apa oke ti ibudo kikun ti ni ipese pẹlu ojò iwọntunwọnsi omi titẹ nigbagbogbo.Nigbati omi ba kun ojò iwọntunwọnsi ti o si de ipele eto, omi ifunni pneumatic diaphragm àtọwọdá sunmọ.
Igbesẹ 4
Gbona yo lilẹ ibudo
Ibusọ yii jẹ lilo ni akọkọ lati weld-lilẹ fila ti igo idapo ṣiṣu lẹhin kikun.O gba awọn awo alapapo ilọpo meji lati gbona awọn fila ati awọn ebute oko igo lọtọ, pari lilẹ weld ni iru yo-yo gbona ti kii ṣe olubasọrọ.Awọn iwọn otutu alapapo ati akoko jẹ adijositabulu.
Igbesẹ 5
Ibudo ijade igo
Awọn igo ti a fi silẹ ni a gbe lọ si orin ti njade igo nipasẹ ibudo igo igo, ki o si tẹ sinu ilana ti o tẹle.
Awọn anfani:
1.Pẹlu kikun kikun;gbigba agbara afẹfẹ deede, le ṣakoso iwọn ibajẹ ti igo lẹhin sterilization.
2.No igo ko si kikun, ko si igo ko si capping.
3.It le de ọdọ awọn agbara to 15,000BPH, da lori ibeere alabara.
4.There are different types of caps which can be applyed on the final igo: Igbẹhin Euro fila;Idede Irigeson fila;Fila dabaru;Stopper ati Aluminiomu fila.
5.It ni pipe GMP-ni ifaramọ mimọ ati iṣẹ sterilization.
Awọn pato Imọ-ẹrọ:
| Item | Awoṣe ẹrọ | ||||
| XGF (Q) / 30/24/24 | XGF30/30/24/24 | XGF (Q) / 36/30/36 | XGF (Q) / 50/40/56 | ||
| Agbara iṣelọpọ | 100ml | 7000BPH | 7000BPH | 9000BPH | 14000BPH |
| 500ml | 6000BPH | 6000BPH | 7200BPH | 12000BPH | |
| Iwọn igo to wulo | ml | 50/100/250/500/1000 | |||
| Lilo afẹfẹ | 0.5-0.7Mpa | 3m3/min | 3m3/min | 3m3/min | 4-6m3 / iseju |
| WFI agbara | 0.2-0.25Mpa | 1-1.5m3 / h | |||
| Iwọn ẹrọ | T | 6 | 6.5 | 7 | 9 |
| Iwọn ẹrọ | mm | 4.3 * 2.1 * 2.2 | 5.76*2.1*2.2 | 4.47*1.9*2.2 | 6.6*3.3*2.2 |
| Ilo agbara | Motor akọkọ | 4 | 4 | 4 | 4 |
| Capping oscillator | 0.5 | 0.5 | 0.5 | 0.5*2 | |
| Ionic afẹfẹ | 0.25*6 | 0.25*5 | 0.25*6 | 0.25*9 | |
| Moto gbigbe | 0.37*2 | 0.37*2 | 0.37*2 | 0.37*3 | |
| Alapapo awo | 6*2 | 6*2 | 6*2 | 8*3 | |
Ẹya laini iṣelọpọ:
1.It le pade iṣelọpọ ti iwọn oriṣiriṣi (100-1000ml).
2.It loo fun awọn mejeeji Standard PP igo ati Ara-collapsed asọ PP igo.
3.Apply si awọn apẹrẹ eiyan ti o yatọ: yika, oval, alaibamu, bbl
4.High gbóògì agbara: ibiti o lati 4000-15000bottles fun wakati kan.
5.The wasted raw material for the production of one 500 ml PP igo jẹ dogba si 0%.
Ohun elo ni ile-iwosan:
